• /// x-108.com in a new style
    /// After more than 4 years it was time to update the forum to the latest version. We also decided on a new design...

X-108 Info x108g mars cap ? (1 Viewer)

Illusi0ns

Professional-Boarder
X-108 Member
Registriert
6 Juli 2017
Beiträge
16
Punkte Reaktionen
3
Punkte
3
Alter
41
Ort
vk3
Verified User
YES
Rufzeichen/Call
Vk3fail
serial starts in cxg

i looked at one mod provided here but board looks difrent min dont seen to have numbers one one board
apart from x108g ssigbd-v1.42.8rtm
 

Johnny

Beginner
X-108 Member
Registriert
23 August 2018
Beiträge
1
Punkte Reaktionen
0
Punkte
1
Alter
46
Rufzeichen/Call
N2jrw
serial starts in cxg

i looked at one mod provided here but board looks difrent min dont seen to have numbers one one board
apart from x108g ssigbd-v1.42.8rtm
Mine was the same way. But on the picture provided I took a chance and removed the jumper that was basically in the same spot as the one shown. And it worked for me. Not sure if you have tried this already. Good luck
 

Adam Farber

Junior Boarder
X-108 Member
Registriert
17 Februar 2019
Beiträge
7
Punkte Reaktionen
0
Punkte
1
Alter
68
Rufzeichen/Call
W4AJF
Hi guys, new here...The mod says to take off the back panel but the SO-239 is attached, do you really have to take off the back panel? Thanks, Adam
 

Richardiii

Beginner
X-108 Member
Registriert
3 April 2019
Beiträge
1
Punkte Reaktionen
0
Punkte
1
Alter
65
Rufzeichen/Call
ve3rdz
Cs108g+ model i have remove front knobs and screws and bottom screws and back screws the board will pull out from the back not the front flip over and u will find that resistor near the front as shown in diagram it worked great for me open tx everywhere
 

Users who are viewing this thread

Oben
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock    No Thanks