• /// x-108.com in a new style
    /// After more than 4 years it was time to update the forum to the latest version. We also decided on a new design...

X-108 Info Digital mode x-108G - short summary (1 Viewer)

admin

Administrator
Teammitglied
X-108 Member
SITE-ADMIN
SITE-MOD
Registriert
30 November 2014
Beiträge
113
Punkte Reaktionen
64
Punkte
1.027
Ort
Stuttgart
Country
de
Website
do7psl.de
Verified User
YES
Rufzeichen/Call
noCall
yahoo group

usb connection for cat and audio…?


Basically, no, you cannot do it all from the USB connector. That is for remote control only.

You have to use a combination of the USB connector for remote control, the speaker out for audio into your PC, and AUX jack or MIC jack for transmit audio into the radio. You can also just use the MIC jack for transmit audio AND PTT for transmit, but you still have to use the speaker out for audio out to the PC. The radio partially emulates an ICOM 7000 for remote control CAT commands (search for ICOM CAT commands to learn about them).

There is no single magic solution, but I’ve made many digital QSO’s on PSK31, Contestia, Olympia, and a few JT65 using Multi PSK, Ham Radio Deluxe (with the embedded DM780 display program).

I initially used the USB cable for getting frequency data to the radio, and the RJ45 MIC jack for PTT and audio into the radio, and speaker out for audio to my PC. i used and old DigiPan MIC adapter. I had to use a 2nd USB-to-Serial adapter since the old DigiPan was serial port only.

A firmware update in late December fixed an issue with the PTT via the USB port. I now use that, and speaker out and AUX audio in.

KD5HVO

keep in mind that the audio output jack is a stereo jack. Careful reading of the manual reveals this. (("External speaker output — Speaker or Headphone (3.5 stereo Socket); Otherwise it will damage the rig.... P. 11)).

Therefore, do not use a mono audio plug or the "ring channel" will be shorted out and this could damage the audio output amplifier. Using only one channel, the "Tip Channel," is not a problem if a stereo headphone or external speaker is not used. There is plenty of volume available. This design is to make it easy for using the most common type of headphone out there. Also, since I do not plan to open my radio unless necessary, this is a practical consideration, for me. Photos of the boards make me see in my mind's eye the words, "Don't go there!" Unless something smokes, the covers stay in place.
 

wgoodf

Junior Boarder
X-108 Member
Registriert
5 Juli 2016
Beiträge
7
Punkte Reaktionen
2
Punkte
3
Alter
52
Verified User
NO
Rufzeichen/Call
mm0inh
yahoo group

usb connection for cat and audio…?


Basically, no, you cannot do it all from the USB connector. That is for remote control only.

You have to use a combination of the USB connector for remote control, the speaker out for audio into your PC, and AUX jack or MIC jack for transmit audio into the radio. You can also just use the MIC jack for transmit audio AND PTT for transmit, but you still have to use the speaker out for audio out to the PC. The radio partially emulates an ICOM 7000 for remote control CAT commands (search for ICOM CAT commands to learn about them).

There is no single magic solution, but I’ve made many digital QSO’s on PSK31, Contestia, Olympia, and a few JT65 using Multi PSK, Ham Radio Deluxe (with the embedded DM780 display program).

I initially used the USB cable for getting frequency data to the radio, and the RJ45 MIC jack for PTT and audio into the radio, and speaker out for audio to my PC. i used and old DigiPan MIC adapter. I had to use a 2nd USB-to-Serial adapter since the old DigiPan was serial port only.

A firmware update in late December fixed an issue with the PTT via the USB port. I now use that, and speaker out and AUX audio in.

KD5HVO

keep in mind that the audio output jack is a stereo jack. Careful reading of the manual reveals this. (("External speaker output — Speaker or Headphone (3.5 stereo Socket); Otherwise it will damage the rig.... P. 11)).

Therefore, do not use a mono audio plug or the "ring channel" will be shorted out and this could damage the audio output amplifier. Using only one channel, the "Tip Channel," is not a problem if a stereo headphone or external speaker is not used. There is plenty of volume available. This design is to make it easy for using the most common type of headphone out there. Also, since I do not plan to open my radio unless necessary, this is a practical consideration, for me. Photos of the boards make me see in my mind's eye the words, "Don't go there!" Unless something smokes, the covers stay in place.
Just to add: I use the Buxcomm Rascal III - Bought the one with the ICOM 7000 RJ45 mic connect. Works great. Sometimes the incoming signals are loud enough to trigger TX, but once you get the hang of the sound levels, it is pretty easy.
From the box to my first QSO was 15mins.
Well worth it. It has been in use since December 2015 - No problems yet.
 

Gilles VE2GIQ

Chef-Boarder
X-108 Member
Registriert
8 Juni 2016
Beiträge
9
Punkte Reaktionen
2
Punkte
1
Verified User
YES
Rufzeichen/Call
ve2giq
Anyone has the microphone pinout for the X108-G OLED ?
I'm working on an automatic tuner interface using a 1 Khz tone generator at the MIC input, and using an Elecraft T1 tuner. Need the Microphone pinout from pins 1 to 8 please.
Thanks !
 

OLEG V. UTKIN

R2ANX
X-108 Member
Registriert
8 Juli 2016
Beiträge
4
Punkte Reaktionen
1
Punkte
3
Alter
71
Ort
MOSCOW
Website
www.qrz.com
Rufzeichen/Call
R2ANX
Dear administrator!
You write "A firmware update in late December fixed an issue with the PTT via the USB port. I now use that, and speaker out and AUX audio in.". I established firmware from the website of the producer, the file Name: outdoor version of X108G firmware update_build024, Size: 135.96KB, Date Added: 05/01/2016. But, unfortunately, X-108G from the Ham Radio Deluxe program does not execute the PTT command and does not pass into the transfer mode.
Very much I ask for your help to me. Please send me your firmware with which my X-108G will work completely.
With great respect, sincerely yours
Oleg Utkin
Russia, Moscow.
flyboat030652@mail.ru
 
Zuletzt bearbeitet:

OLEG V. UTKIN

R2ANX
X-108 Member
Registriert
8 Juli 2016
Beiträge
4
Punkte Reaktionen
1
Punkte
3
Alter
71
Ort
MOSCOW
Website
www.qrz.com
Rufzeichen/Call
R2ANX
I want to add one more information, will be perhaps useful to other participants of a forum.
firmware Name: Outdoor version of X108G_OLED_FW_V2.00.0_build004, Size: 125.18KB, Date Added: 06/05/2016 is posted on the website of the producer.
After its loading X-108G at me the supply voltage became wrong to be displayed - instead of 13,8 there was 16,5 V. And also S-metr has ceased to work.
It is also very important to disconnect surely an USB cable from the transceiver after installation of new firmware as it is written down in the instruction for updating, and then only to include ON. If not to make it, X-108G can join with the dark screen.
73!
 
Zuletzt bearbeitet:

KH6BE

Junior Boarder
X-108 Member
Registriert
2 August 2016
Beiträge
7
Punkte Reaktionen
1
Punkte
3
Ort
Honolulu, Hawaii, USA
I am a new X-108G owner (SN 104xx), and I would like to use the radio in digital modes with either my MacBook Air or my iPad. I have purchased a Rigblaster from West Mountain Radio for the audio interfacing.

Has anyone confirmed for certain if the AUX jack on this radio is functional, and what it does if it is a working connection?
 

OLEG V. UTKIN

R2ANX
X-108 Member
Registriert
8 Juli 2016
Beiträge
4
Punkte Reaktionen
1
Punkte
3
Alter
71
Ort
MOSCOW
Website
www.qrz.com
Rufzeichen/Call
R2ANX
The AUX socket on X-108G works. It is an entrance AUDIO. On it AUDIO OUT signal from PC is given. I successfully use X-108G for work in WSPR. However there is no work experience with iOS, I have Windows 10.
73!
 

Anhänge

  • 16_08_09.png
    16_08_09.png
    1,1 MB · Aufrufe: 34

KH6BE

Junior Boarder
X-108 Member
Registriert
2 August 2016
Beiträge
7
Punkte Reaktionen
1
Punkte
3
Ort
Honolulu, Hawaii, USA
Спасибо большое, Oleg! Is there any advantage to using the AUX jack for digital input over the RJ45 mic jack? With the RJ-45, it looks like I can control PTT and audio in, and I would not need to use AUX?
 

OLEG V. UTKIN

R2ANX
X-108 Member
Registriert
8 Juli 2016
Beiträge
4
Punkte Reaktionen
1
Punkte
3
Alter
71
Ort
MOSCOW
Website
www.qrz.com
Rufzeichen/Call
R2ANX
Hi Stanley! I control PTT through USB port. At the same time I select from the controlling program Icom IC-7000, COM3. To the RJ-45 connector I have connected microphone, from its keypad it is more convenient to control X-108G.
 

KH6BE

Junior Boarder
X-108 Member
Registriert
2 August 2016
Beiträge
7
Punkte Reaktionen
1
Punkte
3
Ort
Honolulu, Hawaii, USA
I have set up all the connections like Oleg mentioned, but I cannot get any of the digital or rig control software to work reliably with the virtual COM port. Some programs will not read frequency or control PTT at all. Others will work for a little while, but then stop working or crash in the middle of an attempted QSO.

I have tried different USB cables, and have used 4 different computers - 2 Windows, and 2 Macintosh. I think something may be wrong with the radio, or the emulation of the IC-7000 is just not very good.
 

KH6BE

Junior Boarder
X-108 Member
Registriert
2 August 2016
Beiträge
7
Punkte Reaktionen
1
Punkte
3
Ort
Honolulu, Hawaii, USA
The response I got from both the vendor and Xiegu is that Ham Radio Deluxe is the only piece of software known to work with the X108G. That was not the answer I was hoping to hear, and I am selling my X108G to switch to a Japanese or American transceiver that can work with a variety of software control programs.
 

Larry Bailey

Beginner
X-108 Member
Registriert
26 September 2016
Beiträge
1
Punkte Reaktionen
0
Punkte
1
Alter
77
Ort
Sahuarita, AZ
Website
k7lrb.com
Rufzeichen/Call
K7LRB
Hello Oleg,

I am looking for the mic wiring diagram for the Xiegu X108G (outdoor version) in order to use the X108G on the digital modes. Any help will sure be appreciated.

Thanks and 73 for now,
de Larry
 

Hammer

Beginner
X-108 Member
Registriert
19 Mai 2017
Beiträge
2
Punkte Reaktionen
0
Punkte
1
Alter
70
Rufzeichen/Call
W0PAS
yahoo group

usb connection for cat and audio…?


Basically, no, you cannot do it all from the USB connector. That is for remote control only.

You have to use a combination of the USB connector for remote control, the speaker out for audio into your PC, and AUX jack or MIC jack for transmit audio into the radio. You can also just use the MIC jack for transmit audio AND PTT for transmit, but you still have to use the speaker out for audio out to the PC. The radio partially emulates an ICOM 7000 for remote control CAT commands (search for ICOM CAT commands to learn about them).

There is no single magic solution, but I’ve made many digital QSO’s on PSK31, Contestia, Olympia, and a few JT65 using Multi PSK, Ham Radio Deluxe (with the embedded DM780 display program).

I initially used the USB cable for getting frequency data to the radio, and the RJ45 MIC jack for PTT and audio into the radio, and speaker out for audio to my PC. i used and old DigiPan MIC adapter. I had to use a 2nd USB-to-Serial adapter since the old DigiPan was serial port only.

A firmware update in late December fixed an issue with the PTT via the USB port. I now use that, and speaker out and AUX audio in.

KD5HVO

keep in mind that the audio output jack is a stereo jack. Careful reading of the manual reveals this. (("External speaker output — Speaker or Headphone (3.5 stereo Socket); Otherwise it will damage the rig.... P. 11)).

Therefore, do not use a mono audio plug or the "ring channel" will be shorted out and this could damage the audio output amplifier. Using only one channel, the "Tip Channel," is not a problem if a stereo headphone or external speaker is not used. There is plenty of volume available. This design is to make it easy for using the most common type of headphone out there. Also, since I do not plan to open my radio unless necessary, this is a practical consideration, for me. Photos of the boards make me see in my mind's eye the words, "Don't go there!" Unless something smokes, the covers stay in place.

My question concerns the AUX jack on the back. I see reference to audio input but was not able to get the radio to work with this input. Is the jack a stereo jack or two conductor? The radio is new and of march production with current firmware.
I am new to the X108G and have been primarily using the digital modes. The audio input via the microphone is a bit sensitive for my likes. I have been using the DIN audio input with very good success since it requires more audio drive and is more adjustable.
 

Joe Green

Beginner
X-108 Member
Registriert
7 Juni 2017
Beiträge
2
Punkte Reaktionen
1
Punkte
3
Alter
66
Rufzeichen/Call
WB0MMZ
I'm new to this forum. I'm wondering if there is can index for topics or an FAQ page.
Thanks,
Joe
 

kx5sp

Beginner
X-108 Member
Registriert
16 November 2016
Beiträge
2
Punkte Reaktionen
0
Punkte
1
Alter
72
Has anyone been successful at running PACTOR 3 with the X108G. I have not been able to get this working. I don't believe the switching between TX and RX is fast enough on the X108G. All other digital modes seem to work fine but others don't require the fast switching that PACTOR does.

Steve
KX5SP
 

Pedro

Beginner
X-108 Member
Registriert
9 Januar 2018
Beiträge
2
Punkte Reaktionen
0
Punkte
1
Alter
60
Rufzeichen/Call
OA4BLR
[QUOTE = "KH6BE, publicación: 463, miembro: 102"] Спасибо большое, Oleg! ¿Hay alguna ventaja de usar la toma AUX para la entrada digital sobre la toma de micrófono RJ45? Con el RJ-45, parece que puedo controlar el PTT y el audio, ¿no necesita usar el AUX? [/ QUOTE]
[QUOTE = "kx5sp, publicación: 615, miembro: 191"] ¿Alguien ha tenido éxito al ejecutar PACTOR 3 con la X108G? No he podido hacer eso. No creo que el cambio entre TX y RX sea lo suficientemente rápido en el X108G. Todos los demás usuarios digitales funcionan bien, pero otros no requieren el cambio rápido que hace PACTOR.

Steve
KX5SP [/ QUOTE]
 

Pedro

Beginner
X-108 Member
Registriert
9 Januar 2018
Beiträge
2
Punkte Reaktionen
0
Punkte
1
Alter
60
Rufzeichen/Call
OA4BLR
Soy Pedro, de Lima - Perú, nuevo en este grupo. Estoy haciendo las conexiones para hacer digital, ahora no tiene éxito. Por favor, puede publicar los diagramas de conexión para los modos digitales.
 

DD5LP

Crack-Boarder
X-108 Member
Registriert
23 Januar 2018
Beiträge
154
Punkte Reaktionen
11
Punkte
18
Alter
69
Ort
Pürgen, Bavaria, Germany
Website
www.vk2ji.com
Verified User
YES
Rufzeichen/Call
DD5LP
My question concerns the AUX jack on the back. I see reference to audio input but was not able to get the radio to work with this input. Is the jack a stereo jack or two conductor? The radio is new and of march production with current firmware.
I am new to the X108G and have been primarily using the digital modes. The audio input via the microphone is a bit sensitive for my likes. I have been using the DIN audio input with very good success since it requires more audio drive and is more adjustable.
Hi Hammer,
I had read that the aux (3.5mm jack) is there for a future feature and at present does nothing. (from the service Manual:
"AUX interface function is not open yet, the internal
connects to the RX/TX port of processor, can be
reserved as a backup serial port."
- it sounds from this thread as if it is wired up and provides an audio interface? Or has this thread mixed up the aux 3.5mm socket with the 6 pin mini-DIN Acc socket ??

73 Ed.
 

KM6HRD

Junior Boarder
X-108 Member
Registriert
4 Februar 2018
Beiträge
8
Punkte Reaktionen
0
Punkte
1
Alter
57
Rufzeichen/Call
KM6HRD
I have the same question about the aux port. I have a new unit with the latest software that has the SWR meter but the aux doesn't seem to get any audio in from a stereo adapter. Is there a way to enable this that I don't see?

Thanks,
Robb
 

DD5LP

Crack-Boarder
X-108 Member
Registriert
23 Januar 2018
Beiträge
154
Punkte Reaktionen
11
Punkte
18
Alter
69
Ort
Pürgen, Bavaria, Germany
Website
www.vk2ji.com
Verified User
YES
Rufzeichen/Call
DD5LP
I'm certain they meant to say the accessory socket - you know the 6 pin Mini-DIN (pin 5) not the Aux socket - that has connections back to the processor as far as I can see, so don't go trying to push audio input into the AUX socket!
 

Users who are viewing this thread

Oben
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock    No Thanks