• /// x-108.com in a new style
    /// After more than 4 years it was time to update the forum to the latest version. We also decided on a new design...

X-108 Info confirmed x108g cs model marscap v1.42 board (1 Viewer)

DH3SBW

Beginner
X-108 Member
Registriert
27 September 2017
Beiträge
3
Punkte Reaktionen
0
Punkte
1
Alter
46
Rufzeichen/Call
DH3SBW
Does this work for all X108G models?
Where can I find my X108G version?
TiA Chris
 

Illusi0ns

Professional-Boarder
X-108 Member
Registriert
6 Juli 2017
Beiträge
16
Punkte Reaktionen
3
Punkte
3
Alter
41
Ort
vk3
Verified User
YES
Rufzeichen/Call
Vk3fail
the guy i bought mine off asked the suppler an the answer i got was yes
 

DH3SBW

Beginner
X-108 Member
Registriert
27 September 2017
Beiträge
3
Punkte Reaktionen
0
Punkte
1
Alter
46
Rufzeichen/Call
DH3SBW
Thank you - made it - and it works really fine. Thank you!!
 

Illusi0ns

Professional-Boarder
X-108 Member
Registriert
6 Juli 2017
Beiträge
16
Punkte Reaktionen
3
Punkte
3
Alter
41
Ort
vk3
Verified User
YES
Rufzeichen/Call
Vk3fail
no problem, your welcome :)

now back to working on my homebrew tuner with 2x 460pf just gotta make the coil for taps
 

crazyJ DAVIS

Beginner
X-108 Member
Registriert
10 Januar 2018
Beiträge
2
Punkte Reaktionen
0
Punkte
1
Alter
51
Rufzeichen/Call
K5jpd
Works as shown effortlessly.This enhancement was done as I decided that I had had quite enough of the Loose usb jack disconnecting from the P.C. Rig control software during operation, so I called and ordered a higher quality solid mount ,Also Powerpoles and a fusible mounting bracket to replace the simulated D.C. input that it came from the factory with. Also while open I improved the board to case grounding wherever possible.I noticed as well the Rj45 plug was loose and had a visible cold solder joint.So 100% Q5 rig after a couple months now and the Receive static floor level is a solid 3db lower since then.
Tnx,
CraZy J
 

Illusi0ns

Professional-Boarder
X-108 Member
Registriert
6 Juli 2017
Beiträge
16
Punkte Reaktionen
3
Punkte
3
Alter
41
Ort
vk3
Verified User
YES
Rufzeichen/Call
Vk3fail
Works as shown effortlessly.This enhancement was done as I decided that I had had quite enough of the Loose usb jack disconnecting from the P.C. Rig control software during operation, so I called and ordered a higher quality solid mount ,Also Powerpoles and a fusible mounting bracket to replace the simulated D.C. input that it came from the factory with. Also while open I improved the board to case grounding wherever possible.I noticed as well the Rj45 plug was loose and had a visible cold solder joint.So 100% Q5 rig after a couple months now and the Receive static floor level is a solid 3db lower since then.
Tnx,
CraZy J

you may have interfearance plaz a few houses down ?
 

crazyJ DAVIS

Beginner
X-108 Member
Registriert
10 Januar 2018
Beiträge
2
Punkte Reaktionen
0
Punkte
1
Alter
51
Rufzeichen/Call
K5jpd
you may have interfearance plaz a few houses down ?
Not that I am aware of.Most of R.F. is 20 ft. above 2nd. story roofline,and I am properly earth grounded,and 3KW L.P.F. inline after SB-220,and before swithchbox and RF Choke.I speak to them a couple x a week with no mention.Maybe just good neighbors??IDK?
 

probelhat

Beginner
X-108 Member
Registriert
3 Oktober 2017
Beiträge
2
Punkte Reaktionen
0
Punkte
1
Alter
52
Rufzeichen/Call
oh6xx
tested and working ok
 

Marco PE3M

Junior Boarder
X-108 Member
Registriert
25 September 2019
Beiträge
7
Punkte Reaktionen
1
Punkte
3
Alter
57
Ort
The Hague, Netherlands
Verified User
YES
Rufzeichen/Call
PE3M
One question though, what will be the TX frequency range then?
Okay, one more question, what sort of backup battery is that on the picture?
I must change it for a new one, and it seems like a CR2016, or a CR2032.
 

kg9h1

Chef-Boarder
X-108 Member
Registriert
2 November 2019
Beiträge
12
Punkte Reaktionen
1
Punkte
1
Alter
72
Rufzeichen/Call
kg9h
It seems there are two lithium batteries in the X-108G. I think the one in the picture is for the RAM for operation of the radio. de Frank KG9H
 

Users who are viewing this thread

Oben
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock    No Thanks