Suchergebnisse

Probably due to the fact that the display mode is not set correctly, frequently used segments for the year of operation burned out, and steel instead of white - yellow. Yuck It does not interfere with work, but it is aesthetically unpleasant.Depressed

Install the virtual port driver, connect the transceiver to the computer with a USB cable, this will be port COM3. In the amateur program you will be using, specify the CAT port as port COM3 and the PTT port as OmniRig. Connect the headphone output of the computer to the transceiver mini DIN...

OMNIRIG. Install, and use like CAT-port with any programms.

In my transceiver, the brightness of the display is also not adjustable. 1% or 100% - there is no difference.

It took more than a year, the guarantee was over, and I decided to modify my radio. Set the relay to connect an external amplifier. This requires two parts. Connector for connecting video - audio equipment with a thread diameter of 6 mm, and a small-sized relay for 9 volts. I used the Soviet...

No. And I will not, my radio station has more than a year, the guarantee is over, the faded segments do not interfere. Just unpleasant. Trifle - but unpleasant.

I tried switching in the engineering menu 1% brightness and 100% brightness, but did not notice much difference. Display TFT, can someday I replace it. This diversity of segments does not interfere, it is almost invisible, only for me, as a finicky radio amateur, it is visible.

It's been more than a year since I use this radio. The main impression is good radio. Great for trips and hiking, when the weight of the backpack is important. I work in archeology, I know. ;) But not all is perfect - China is China. For a year, the segments of the display digits that glow...

Thanks for the info. But I solved the problem easier. Amplifier I turn on by the pedal with the foot, and the transceiver - with the tangent.

"I installed the latest firmware" Problems with modulation began after the upgrade of transciever software?

Hi all. Somebody to connect an external power amplifier to the transceiver X108G? Where to take from the transceiver output PTT for amplifier relay? Mini DIN 6 ACC have not it.

Hi Gerd. Sorry, I have not a good resolution camera now, only GoPro action video camera, so - it is little video file.

Hello Gerd. I assure you that the encoder knob, and the menu is very comfortable on my machine. I myself also want to see what's inside, but it is a completely new and under warranty, so I do not want to open it unnecessarily.

My X108G was coming by post yesterday. It have other design - 4 buttons, other tuner device, other soft (look on the display, my soft is 16 april 2016) and it is not problem what You have. I think chinishe dont stop in last time like Yaesu FT-8x7 RU2FB