• /// x-108.com in a new style
    /// After more than 4 years it was time to update the forum to the latest version. We also decided on a new design...

X-108 Info Bad Tx Audio Quality and Level (1 Viewer)

Stw2018

Beginner
X-108 Member
Registriert
9 August 2018
Beiträge
3
Punkte Reaktionen
0
Punkte
1
Alter
64
Rufzeichen/Call
W8SAW
Hello All,

It aeems to be a general problem that the Tx quality is poor, very muffled and low drive getting only about 5 watts peak.
Does anybody have a solution for this?
Eg Alternative mic insert, adjusted the mic gain inside the rig on the PCB?

Any ideas appreciated!

73

Steve

W8SAW
G4DFN
 

DD5LP

Crack-Boarder
X-108 Member
Registriert
23 Januar 2018
Beiträge
154
Punkte Reaktionen
11
Punkte
18
Alter
69
Ort
Pürgen, Bavaria, Germany
Website
www.vk2ji.com
Verified User
YES
Rufzeichen/Call
DD5LP
Hi Steve, are you sure you are running the rig on 13.8V and that's getting to the rig, not being dropped across the fuse(s) you added in - you did add a fuse in the power-line I hope.
The display on the rig shows the voltage it is seeing, so just take as look at that when you are transmitting if it drops a lot between Rx and Tx, you've got a problem in the supply lines or the source (PSU / battery) you are using.

Low voltage when the rig is drawing amps on Tx would explain what you are experiencing.

73 Ed.
 

Users who are viewing this thread

Oben
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock    No Thanks