FAQ Xiegu X-108 CW Keying Issues (1 Viewer)

[Gandolf]

With CW mode and keyer selected, no visible response from unit when keying. Have SN starting with X11, and on V1.00.4 firmware, so hoping updating to v2.0.0/10 will resolve this. Any recommendations as to starting with 2.0.0 vs 2.0.1 ?

 

[Gandolf]

With CW mode and keyer selected, no visible response from unit when keying. Have SN starting with X11, and on V1.00.4 firmware, so hoping updating to v2.0.0/10 will resolve this. Any recommendations as to starting with 2.0.0 vs 2.0.1 ?

Was able to find and install X108G_OLED_FW_V2.00.1_build002 firmware, which appears to have fixed the keying issue, though it reset my IF frequency settings (be sure to back these up first -- I had to open rig to get settings from label on circuit board).

Now working on getting CAT working.