- Registriert
- 6 April 2026
- Beiträge
- 10
- Punkte Reaktionen
- 0
- Punkte
- 1
- Alter
- 43
- Rufzeichen/Call
- 090898401
Hello my friends!.
I'm having a problem with my X108G.
I previously disassembled the X108 to replace the screen and repair the threaded holes. The problem is that after reassembling, the device cannot Tx. When I disassemble it, it Tx normally. After several checks, I've pinpointed the faulty area. That area, if pressed down, cannot Tx. I discovered the metal cover was the cause, possibly causing a short circuit somewhere when pressed. I fixed it by disassembling it, applying tape, and sealing it. The problem is now solved.
I accidentally damaged a resistor. And I can't determine its value.
If you know, or have any information, please help me.
Thank you very much!
Best regards,
73 DE XV2DA
I'm having a problem with my X108G.
I previously disassembled the X108 to replace the screen and repair the threaded holes. The problem is that after reassembling, the device cannot Tx. When I disassemble it, it Tx normally. After several checks, I've pinpointed the faulty area. That area, if pressed down, cannot Tx. I discovered the metal cover was the cause, possibly causing a short circuit somewhere when pressed. I fixed it by disassembling it, applying tape, and sealing it. The problem is now solved.
You must be registered for see images attach
I accidentally damaged a resistor. And I can't determine its value.
You must be registered for see images attach
If you know, or have any information, please help me.
Thank you very much!
Best regards,
73 DE XV2DA