X-108 Info update the xiegu X-108G (1 Viewer)

[admin]

FIRMWARE X108G Outdoor Version - for older and newer x108G outdoor

• About latest version of firmware for X108G, please see below information:
• If your X108G is indoor version, please use the latest version: X108G_FW_V1.00_build004
• If your X108G is outdoor version, please note:
• If the first number of your X108G’s serial number is 0, please use the latest version: X108G_OLED_FW_V1.00_build029
• If the first number of your X108G’s serial number is 1 (except 10350~10412), please use the latest version: X108G_OLED_FW_V2.00.0_build010
• If your serial number is between #10350~10412, please use this latest version: X108G_OLED_FW_V2.00.0_build010(VCMP)

///Please note:

1. Make a backup of your advanced settings (press and hold F1 button while powering on). notice the settings on paper or take a pic.
2. do the update:
   • Firmware update tutorial:
     1. Press the frequency knob (keep the action), turn on, connect the
        USB cable to the computer.
     2. Open “ My computer”, there is a Update X108 (mobile
        storage device.
     3. Open Update X108 (*), delete the file, this time on the radio will show delete progress (waiting for progress to complete 100%).
     4. Copy the latest firmware to the Update X108 (to wait for
        replication to complete, and then disconnect the USB and the
        computer.
     5. Restart X108G, firmware update is completed!
3. thats it

Unless you have made backup of your extended settings - check this tutorial and file to bring your filter settings back

 

[jkb770]

Would be nice to add the Firmware Date that is displayed on the Radio after the update.

 

[MikeW]

Update went very smoothly - no problems

 

[MikeW]

Looks as though I need the new handbook after the update.

 

[DD5LP]

I have just purchased a second hand X-108 from a private seller, the Serial number starts with X - do I sismply ignore that and use the next 5 digits to work out which range of serial numbers this is from, so that I can get the correct firware upgrade?

Ed.

 

[Ermanno]

Good Mornig,
I connected my Xiegu X 108G to the computer to do the upgrade but it was erased and now there is only the black screen. I tried to download updates from Xiegu site with no results. Please help me ... I bought the radio for only a few months. Thank you
Ermanno Bellucci

 

[DD5LP]

As the rig is new and you bought through a dealer, I would suggest you take it back to the dealer, tell him that you tried to install the latest firmware, as recomended by Xiegu and now it doesn't work and he should contact Xiegu on your behalf for a reolution.

73 Ed DD5LP.

 

[Ermanno]

Thank you.
I will try to do this.

 

[Aldrich]

My version is 1.00.3a. With 2.00.0 version will I have the antenna analyzer?

 

[Timur]

not

 

[Timur]

Good day!
Tell me who knows.
Before flashing, I downloaded the file from the transceiver ".bin", then flashed the transceiver and everything began to work poorly. Is it possible now somehow using the downloaded file to download it back to restore the firmware?

 

[Mauro.blu]

I was afreid tUo do it but updated 100%. Thank you.

 

[Mauro]

It works

I was afreid tUo do it but updated 100%. Thank you.[/QUOTE

 

[fwfd601]

will this work for cxg 10990?

Thanks
Ryan
K9RYN

 

[OA4LDR]

[QUOTE = "Ermanno, publicación: 879, miembro: 660"] Good Mornig,
Conecté mi Xiegu X 108G a la computadora para realizar la actualización, pero se borró y ahora solo queda la pantalla en negro. Traté de descargar actualizaciones del sitio Xiegu sin resultados. Por favor, ayúdame ... Compré la radio por solo unos meses. Gracias
Ermanno Bellucci [/ CITA]
Después de actualizar quita el cable de voltaje por un minuto y vuelve a conectar y encender el equipo y listo! Saludos cordiales 73s OA4LDR

 

[DD5LP]

For those who dont read Spanish - here's a Google translation:

Good Mornig,
I connected my Xiegu X 108G to the computer to perform the update, but it was deleted and now only the black screen remains. I tried to download updates from the Xiegu site without results. Please help me ... I bought the radio for only a few months. Thank you
Ermanno Bellucci

After updating, remove the voltage cable for one minute and reconnect and turn on the equipment and voila! Best regards 73s OA4LDR

Thanks for the additional step Tito.

 

[OA4LDR]

Conseguí una versión más actual de diciembre del 2017 y anda fenomenal! También le hice la modificación de los 27 MHZ y dejó muy bien, en algunos modelos no figura el nombre R76 pero es la misma resistencia que hay que desoldar con mucho cuidado! Adjunto fotografías! Saludos cordiales desde Lima-Peru 73s OA4LDR
oa4ldr@gmail.com

 

[OA4LDR]

Last update X108G May 7, 2017 Hello friends, best regards from Lima-Peru, Tito León del Risco greets you, OA4LDR holder and I want to share with you my experiences with the xiegu x108g outdoor the 2 most interesting updates that I got looking for enough on the web! Here I share 2 one that says video is the one that appears on the YouTube link and that never shared its firmware version only the video, because here I bring you that firmware version in a file.zip that says video at the end! and the other one is the last one I got that is from May 7, 2017, which is the most current one I could find, if someone has a more modern one with more firmware improvements it would be excellent if I can share it! Do not be afraid to update your firmware, if you put a version that is not that of your computer you will not die in the attempt why you can resuscitate immediately! do not forget that at the end of the update procedure remove the USB cable and remove the rear power cable from the x108g otherwise you will not be able to reset the device! If you turn on the device only the black screen and a strange sound do not panic! Your team is not dead! Repeat the entire update process from scratch again and change the firmware to another! here I leave captures and the files of the 2 firmwares cordial greetings to all from Lima-Peru OA4LDR Tito León del Risco

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

 

[qwedsa182]

could i request permission to download the update please? i hope this is the right place ?

 

[qwedsa182]

has anyone had it where the computer doesnt detect the usb ?