X-108 Info x108g mars cap ? (2 Viewers)

[Illusi0ns]

serial starts in cxg

i looked at one mod provided here but board looks difrent min dont seen to have numbers one one board
apart from x108g ssigbd-v1.42.8rtm

 

[Johnny]

serial starts in cxg

i looked at one mod provided here but board looks difrent min dont seen to have numbers one one board
apart from x108g ssigbd-v1.42.8rtm

Mine was the same way. But on the picture provided I took a chance and removed the jumper that was basically in the same spot as the one shown. And it worked for me. Not sure if you have tried this already. Good luck

 

[Adam Farber]

Hi guys, new here...The mod says to take off the back panel but the SO-239 is attached, do you really have to take off the back panel? Thanks, Adam

 

[Richardiii]

Cs108g+ model i have remove front knobs and screws and bottom screws and back screws the board will pull out from the back not the front flip over and u will find that resistor near the front as shown in diagram it worked great for me open tx everywhere