• /// x-108.com in a new style
    /// After more than 4 years it was time to update the forum to the latest version. We also decided on a new design...

X-108 Info Xiegu X-108G Outdoor QRP-Transceiver - files and mods (2 Viewers)

Gilles VE2GIQ

Chef-Boarder
X-108 Member
Registriert
8 Juni 2016
Beiträge
9
Punkte Reaktionen
2
Punkte
1
Verified User
YES
Rufzeichen/Call
ve2giq
Xiegu X108G Outdoor version standard PTT out procedure.
Check this procedure if you want to add a standard PTT out for your linear amplifier.
 

Anhänge

  • Xiegu X108G Outdoor Version Standard PTT OUT.pdf
    7,6 MB · Aufrufe: 78

K7RAN

Beginner
X-108 Member
Registriert
21 März 2017
Beiträge
3
Punkte Reaktionen
0
Punkte
1
Alter
59
Rufzeichen/Call
K7RAN
I wonder if the R76 removal mod (wideband) works on the CS108G+ version as well?
 

manuelg

Junior Boarder
X-108 Member
Registriert
25 April 2017
Beiträge
6
Punkte Reaktionen
0
Punkte
1
Alter
54
Rufzeichen/Call
ea4cgf
december 2016 1.00.04 firmware for an x108g outdoor with CXG 10xxx serial number

remember to first backup your settings power on+press F1 and write down everythung. I would do the same thing with power on+press F2

Only then update the firmware
 

Anhänge

  • -X108G_OLED_FW_V2.00.1_build002.zip
    128,7 KB · Aufrufe: 41

DH3SBW

Beginner
X-108 Member
Registriert
27 September 2017
Beiträge
3
Punkte Reaktionen
0
Punkte
1
Alter
46
Rufzeichen/Call
DH3SBW
Hat jemand eine Anleitung, wie ich das Gerät X108G am besten auseinander bauen kann? Würde gerne die tx Erweiterung basteln ..
VY 73
 
Zuletzt bearbeitet:

Bryancaddy

Beginner
X-108 Member
Registriert
16 Februar 2018
Beiträge
4
Punkte Reaktionen
0
Punkte
1
Alter
47
Rufzeichen/Call
k7bat
Hello all. I have an issue that I am sure is something that I did with the firmware. Radio was working, then I updated to v2.00.1_build002 and I dont hear anything. SQL is 0, so its not that.. my antenna is good, I am using it on my IC7300 with out issue. I use this little guy for camping, but I think its dead now. I got all my numbers, put them in and no joy.

I could have screwed something up... hard to tell. I have tried downgrading, and upgrading.. no joy for sound. display comes on, looks good.

Thanks for reading this. ;)
 

Timur

Beginner
X-108 Member
Registriert
15 Juli 2018
Beiträge
4
Punkte Reaktionen
0
Punkte
1
Alter
42
Rufzeichen/Call
UB9ODT
Good day!
After upgrading to version 1.00.4, the sound became quiet, and the stations are not listening. Settings F1 correspond to the saved. Tell me how to return the sound?
 

Henry Hobart

Beginner
X-108 Member
Registriert
10 November 2018
Beiträge
4
Punkte Reaktionen
0
Punkte
1
Alter
65
Rufzeichen/Call
n3lvf
one firmware gives me a display but no sound,,other firmware gives me a blank screen....my rig is 01 serial number,i got that part right..i do a lot on computers at work.....i am not out tho,,.i paid 100 bucks for this at a fleemarket..knowing the transmitt section was out..all should note where you order mosfets ,the finals..one company off ebay that sells replacement mosfets , thay are bigger than orig ones...may try to contact somone from mfg...but dont have a lot of hopes..
 

Elsibert

Beginner
X-108 Member
Registriert
7 Februar 2019
Beiträge
4
Punkte Reaktionen
0
Punkte
1
Alter
41
Rufzeichen/Call
LA7HKA
Hi im new here.
Just got my X108G outdoor radio. It has the FW v1.00.4 May 2017. The radio does not RX or TX, do anyone have suggestions of what to do?
 

Elsibert

Beginner
X-108 Member
Registriert
7 Februar 2019
Beiträge
4
Punkte Reaktionen
0
Punkte
1
Alter
41
Rufzeichen/Call
LA7HKA
Hello again.
Is it possible the system settings are wrong from the factory?
 

Elsibert

Beginner
X-108 Member
Registriert
7 Februar 2019
Beiträge
4
Punkte Reaktionen
0
Punkte
1
Alter
41
Rufzeichen/Call
LA7HKA
Trying to contact xiegu.
 

F8LDxr

Beginner
X-108 Member
Registriert
11 Oktober 2018
Beiträge
1
Punkte Reaktionen
0
Punkte
1
Alter
50
Rufzeichen/Call
Kb3exf
Hi new here just got my x108g and AM swings in reverse can anyone help with the outdoor version, the AM reverse modulation? How do i reverse this crime against AM opperation?
Thanks in advance for any info at all. 73s hope to hear these radios on the air.
 

Henry Hobart

Beginner
X-108 Member
Registriert
10 November 2018
Beiträge
4
Punkte Reaktionen
0
Punkte
1
Alter
65
Rufzeichen/Call
n3lvf
Hi new here just got my x108g and AM swings in reverse can anyone help with the outdoor version, the AM reverse modulation? How do i reverse this crime against AM opperation?
Thanks in advance for any info at all. 73s hope to hear these radios on the air.
Thay probley all do that..mine also .i also noticed the noise blanket don't work at all...i have a parts radio now...i have used AM on 10 meter and even with backwards swing have got good reports..if ya put a peak reading watt meter on you will have forward swing..best73
 

Elsibert

Beginner
X-108 Member
Registriert
7 Februar 2019
Beiträge
4
Punkte Reaktionen
0
Punkte
1
Alter
41
Rufzeichen/Call
LA7HKA
Finaly got a mail from xiegu. They said to open the radio and check if the antenna connector is is broken(bad solder).
The antenna connector is just fine, no bad solder or anything. Since i allready had open the radio, i traced the signal through bpf's to the mixer. I seems like there is no local oscillator signal to the mixer? The TCXO works fine, strong 26MHz signal. Is there anybody that have the new outdoor version 0,5ppm 26MHz TCXO that have the same problem?
 

OA4LDR

Chef-Boarder
X-108 Member
Registriert
11 Juni 2019
Beiträge
13
Punkte Reaktionen
6
Punkte
3
Alter
46
Rufzeichen/Call
Tito
[QUOTE = "wgoodf, publicación: 443, miembro: 88"] Hola chicos - Acabo de registrarme como tengo un X108G bloqueado.
Estaba teniendo un extraño problema de software: la radio se bloqueaba cuando presionaba el botón para dividir el trabajo y, a veces, giraba la perilla y la frecuencia seguía cambiando después de retirar mi mano.
De todos modos, contacté a Xiegu y me enviaron el archivo V1 build 24. Lo instalé como las instrucciones y ahora la radio está bloqueada con una pantalla blanca.

El proceso que utilicé fue este:
Conecto la radio a la computadora. He probado Windows XP y MacOS.
Sostengo el botón y enciendo; llego a la pantalla de actualización.
La radio se monta como E: - Elimino el archivo firmware.bin.
La radio flash se borra al 100% = Flash Erase OK
Copio el archivo: X108G_OLED_FW_V1.00_build024.xgf - a la radio. (he probado otros y solo he intentado el V2 build10.)
Escritura flash - 137728 bytes - ¡Actualización realizada!
Por favor reinicie su plataforma.

Apago el equipo: desconecto el USB de la computadora, enciendo el equipo y la pantalla está blanca, sin pitido de arranque. La pequeña luz verde en el puerto del micrófono está encendida.
Eso es todo lo que hace: la radio ahora está muerta.

¿Me estoy perdiendo algo o estoy haciendo algo estúpido?
Cualquier ayuda sería muy apreciada.
Gracias por adelantado.
wgoodf / MM6FXZ [/ QUOTE]
Hola saludos cordiales desde lima Perú! Después de quitar la actualización tienes que apagar el equipo,quitar el cable de voltaje encender el equipo sin el cable para ir descargues todo el voltaje que se almacena en el, luego lo apagas y le vuelves. Conectar el cable de voltaje y encenderlo nuevamente y listo regresa a la vida! Saludos cordiales OA4LDR
 

OA4LDR

Chef-Boarder
X-108 Member
Registriert
11 Juni 2019
Beiträge
13
Punkte Reaktionen
6
Punkte
3
Alter
46
Rufzeichen/Call
Tito
Espero que te sirva de ayuda! Saludos!
 

OA4LDR

Chef-Boarder
X-108 Member
Registriert
11 Juni 2019
Beiträge
13
Punkte Reaktionen
6
Punkte
3
Alter
46
Rufzeichen/Call
Tito
[QUOTE = "Jabier, post: 1072, member: 905"] ¿Cómo es posible ver el número de serie? Es posible: CXG0026 ... [/ QUOTE]

Esta es mi serie !!! Y le puse está actualización del x108g v2 y el menú de servicio F1 es de 15 ítems y el menú F2 queda de esta manera se la imagen! ¡Y removí R76 que en mi modelo no lo dije y abrí los 11 metros! Aprovechar en cambiar la pila de la memoria también! Voy a seguir experimentando y les voy informando de las novedades! Voy a tratar de subir el firmware del 2017! Saludos cordiales desde Lima-Peru OA4LDR 73s
 

Anhänge

  • crop_7054139238378814056.png
    crop_7054139238378814056.png
    150,6 KB · Aufrufe: 11
  • crop_1241347444517559153.png
    crop_1241347444517559153.png
    901,4 KB · Aufrufe: 11
  • crop_8535185400855443128.png
    crop_8535185400855443128.png
    898,3 KB · Aufrufe: 10
  • crop_7054139238378814056.png
    crop_7054139238378814056.png
    150,6 KB · Aufrufe: 9
  • crop_1241347444517559153.png
    crop_1241347444517559153.png
    901,4 KB · Aufrufe: 11
  • crop_8535185400855443128.png
    crop_8535185400855443128.png
    898,3 KB · Aufrufe: 11

Users who are viewing this thread

Oben
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock    No Thanks